Scientific and Practical Centre for Materials Research  
220072 Minsk, P. Brovka str. 19

Equipment for wastewater treatment plants










Linked profile in other language
Oleg Ignatenko
+375 17 227 7514
Scientific and Practical Centre for Materials Research offers consumers equipment for wastewater treatment plants under a manufacturing agreement and is looking for partners interested in a distribution services agreement.
The following equipment is offered for wastewater treatment plants.

Manual and mechanical valves of various types, lengths and diameters.
The valves are intended for installation in the chambers of sewer gravity networks and treatment facilities, as well as in the receiving chambers of sewer pumping stations as a sealed shut-off or control device. Closing and opening of the shutter is carried out manually or electrically.

Screw squeezing device, screw conveyor.
The squeezing device is designed for compacting and transporting waste removed from grates and other trash-containing devices. Screw conveyors are used only for transporting waste.
Possible conveyor inclination angle is from 0 to 35°. Various options for manufacturing screws are possible (shaft and shaftless).

Mechanized stepped gratings.
The screen is designed to remove medium and small waste from wastewater (industrial and domestic). The standard sizes of the gratings are selected depending on the required throughput, the composition of wastewater, and the geometric dimensions of the channels in which installation is intended. The main material is stainless steel.

Mechanical hook grille.
The grid is designed for fine cleaning - extraction of medium and small waste from wastewater, followed by their mechanized unloading onto a transport device or waste container. It is possible to produce gratings of various sizes.

Sludge scrapers and silt suckers.
Sludge scrapers are used in primary radial settling tanks to remove sediment that has settled to the bottom of the structure. The design is equipped with a device for removing floating impurities. Sludge suckers are used in secondary radial settling tanks to remove activated sludge from the bottom of the settling tank. These devices are available for settling tanks of various diameters.

Integrated automation of technological processes in the field of water treatment. Automation of treatment facilities, sewage pumping stations, sludge scrapers, suction pumps, sand traps, grate departments, aeration tanks, etc.

A SCADA system that controls distributed devices is used as the top level of process control. RS-485, Ethernet, Wi-Fi, GPRS are used as communication channels.

Development of upper and lower level software.
Design and production of control and automation cabinets. When developing automation projects, modern components are used, such as: programmable logic controllers, variable-frequency drives, electronic flow meters, pressure sensors, ultrasonic level sensors, pneumatic and electric shut-off and control equipment, automated panel gates of our own production.

More details on the Centre's website. (in Russian)
Advantages and Innovations
Process automation provides the following benefits:

Reduces costs due to: significant personnel reduction, saving energy resources, increasing the overhaul period of operating equipment.

The speed of performing repetitive tasks increases. Due to the automatic mode, the same tasks can be completed faster, because automated systems are more accurate in their actions and are not subject to a decrease in performance due to operating time.

The quality of work improves. Eliminating the human factor significantly reduces variations in process execution, which leads to a reduction in the number of errors and, accordingly, increases the stability and quality of the process.
Stage of development
Already on the market
Funding source
State budged
IPR status
Exclusive rights
Secret know-how
Sector group
Sustainable Construction

Organization information

R&D institution
Year established
NACE keywords
C.25.61 - Treatment and coating of metals
C.25.99 - Manufacture of other fabricated metal products n.e.c.
M.72.19 - Other research and experimental development on natural sciences and engineering
M.74.90 - Other professional, scientific and technical activities n.e.c.
Turnover (in EUR)
Already engaged in transnational cooperation
Additional comments
Currently, the Centre is a leader in the field of solid state physics and physical materials science in the Republic of Belarus.

The main direction of scientific research of the Centre is condensed matter physics; the creation of new magnetic, ferroelectric, semiconductor, metallic, superconducting, superhard and optical materials in the form of crystals, ceramics, disordered systems, nanomaterials and nanostructures corresponds to priority areas of fundamental and applied scientific research and priority areas of scientific and technical activity. The goals and objectives of the Centre are implemented through the implementation of a full innovation cycle, starting from fundamental and applied scientific research and ending with the introduction of scientific and scientific-technical products into production.

The main goal of the Centre is to organize and conduct research and development work in the field of physical and physicochemical materials science, to develop and master the production of new types of competitive products. In accordance with this goal, the objectives of the Centre are:
conducting fundamental and applied scientific research in accordance with the accepted priority areas of scientific and technological progress of the Republic of Belarus in the following areas:
- physics of condensed matter;
- creation of new magnetic, ferroelectric, semiconductor, metallic, superconducting, superhard and optical materials in the form of crystals, ceramics, disordered systems, nanomaterials and nanostructures;
- physics of the impact of concentrated energy flows on condensed matter;
- development of methods and technologies for obtaining materials for functional and special purposes;
- metal-polymer composites;
- petrochemistry, forest chemistry and thin-film organic and inorganic materials;
- physics of non-destructive testing;
- development of methods and means of non-destructive testing and technical diagnostics of materials, products and technological processes;
- creating the scientific foundations of information technologies for non-destructive testing and technical diagnostics;
- composite materials and products made from them;
- use of pulse technologies for the creation and production of materials and products;
- vacuum equipment and technology;
- materials and equipment for applying protective and functional coatings;
- structural ceramics;
- medical materials, instruments and equipment;
- special technologies;
ensuring the competitiveness of created scientific and technical products and organizing their industrial development, including on the foreign market;
- development and implementation of mechanisms that ensure economic, information and other connections between research, development, production and sales of new products;
- identifying fundamentally new ways of scientific and technological progress, carrying out applied scientific research in priority areas of scientific and technical activity;
- development of recommendations for using the results of the Center’s scientific research in practice, their support during development in production;
- conducting scientific examinations of the most important scientific, scientific, technical and national economic programs, innovative projects in the Center’s profile;
- studying and summarizing the achievements of world science in the Centre’s profile and promoting their practical use;
- training of highly qualified scientific personnel through postgraduate, doctoral and competitive studies;
- advanced training of scientists and specialists, including in foreign research centers;

The Centre actively cooperates with foreign scientific centers. One of the forms of such cooperation is the implementation of joint scientific projects financed by international funds and organizations.
Languages spoken

Information about partnership

Type of partnership considered
Distribution services agreement
Manufacturing agreement
Type and role of partner sought
Consumers interested in purchasing equipment for wastewater treatment plants under a manufacturing agreement.

Partners interested in purchasing equipment for wastewater treatment plants under a distribution services agreement.
Type and size of partner sought
> 500
SME 51-250
SME 11-50
SME <= 10
R&D Institution
Sole proprietor


Views: 208
Statistics since 29.05.2024 12:50:32