Experimental Design Bureau "Academicheskoe"
http://www.okb-acad.by/
220109 Minsk, A.K. Krasina Str. 99/82

Technological systems for automobile gas refueling stations

COUNTRY OF ORIGIN

Belarus

IDENTIFIER

BO5874

PUBLISHED

2022-12-02

LAST UPDATE

2022-12-02

DEADLINE

Linked profile in other language
Responsible
Aleksandr Korzun
okb-acad@yandex.by
Summary
EDB "Academicheskoe" offers consumers technological systems for automobile gas refueling stations (a set of equipment) for receiving, storing, and issuing liquefied hydrocarbon gases under a manufacturing agreement and is looking for partners to conclude a distribution services agreement.
Description
The system includes:
- one or two tanks (Tanks are manufactured with a nominal volume of 7 m3 and 10 m3 in accordance with the requirements of TU BY 100103729.020-2006. The tanks are equipped with the following fittings and instrumentation: gas drain valve, safety valves, vapor phase selection valve with filling level sensor , level gauge, level indicator, valve);
- pump units with pump: "HYDRO-VAKUUM" SKC 4.08/SKD 4.07 or "AUREX-CORKEN" FD150, "AUREX-CORKEN" Z2000;
- fuel dispensers (Petrolmechanika 6000P, Tatsuno Benc BMP 500/511; Nuovo Pignone DPC (DPBA) 050 LM-LE 1D (High engine life before overhaul (5 million liters), simple design, maintaining dosing accuracy for a long time operation.The column has an electronic control head with a two-sided liquid crystal display.The display shows the price of 1 liter of gas, the amount of gas filled in liters, the amount of money to pay.The electronic head has a non-resettable electromechanical counter showing the total total amount of gas sold.The capacity of the column is 5-50 l/min, accuracy ±0.5%);
- system piping (For the manufacture of system pipelines, seamless pipes are used according to GOST 8733, GOST 8731 from steel 10, 20 according to GOST 1050, bends according to GOST 17375 from steel 20, 09G2S, tees according to GOST 17376 from steel 20, 09G2S. Installation, welding work and quality control are carried out in accordance with SNiP 3.05.02-88, GOST 16037;
- fittings: flanged ball valves DN20 - DN50. Fisher H110-312 Line Protection Valves, Overflow Valve, Model CORKEN B-166 1);
- frames for pumping units and columns;
- ladders and platforms for servicing tanks.

In accordance with the requirements of NPB 38-2003, technological systems for automobile gas filling stations have the following technical characteristics:

Single tank capacity
no more than 10 m3
 The capacity of all tanks of the system  no more than 20 m3
 Working pressure in tanks  no more than 1.6 MPa
 Permissible working temperature of the tank wall  -40 - +45 °С (min/max)
 Filling capacity  not less than 50 dm3/min
The maximum pressure at the outlet of the pump
  1.6 MPa
 Total electricity consumption no more than 9.5 kW
 Estimated service life  not less than 12 years

Systems are available:
- with one ground tank (7m3);
- with two ground tanks (2x7m3);
- with one ground tank (10m3);
- with two ground tanks (2x10m3);
- with one underground tank (10m3);
- with two underground tanks (2x10m3).

At the request of the Customer, it is possible to supply separate tanks for liquefied gases.
Advantages and Innovations
Highly qualified personnel, innovative technologies.
Stage of development
Already on the market
Funding source
State budged
Internal
IPR status
Exclusive rights
Secret know-how
Sector group
Aeronautics, Space and Dual-Use Technologies
Intelligent Energy
Environment
Mobility

Organization information

Type
R&D institution
Year established
1973
NACE keywords
C.25.29 - Manufacture of other tanks, reservoirs and containers of metal
C.25.30 - Manufacture of steam generators, except central heating hot water boilers
C.25.99 - Manufacture of other fabricated metal products n.e.c.
M.72.19 - Other research and experimental development on natural sciences and engineering
M.74.90 - Other professional, scientific and technical activities n.e.c.
Turnover (in EUR)
10-20M
Already engaged in transnational cooperation
Yes
Additional comments
EDB "Academicheskoe", at the present stage of its development, is a diversified design, production and research complex with a closed cycle, from the design of various types of products (reservoir equipment, capacitive equipment and process equipment based on them) to their manufacture and commissioning adjustments in the field:
* science and scientific services (including in the field of nuclear energy);
* chemical apparatus building (for the oil and gas complex and chemical enterprises);
* power engineering (heat-exchange equipment and technological equipment with its use and the use of pressure vessels);
* milk processing (UF, RO, CIP-washers, neutralization plants, dispersers, emulsifiers, pumps of various types and purposes, etc.);
* water treatment (water filters, various types and capacities);
* alcohol production;
* pharmaceutical industry;
* airfield equipment and others.

EDB "Academicheskoe" is one of the leading enterprises with extensive experience in the manufacture of import-substituting equipment in the chemical, oil and gas and nuclear engineering in the Republic of Belarus (licenses No. 02300/544-4 of the Department for Nuclear and Radiation Safety of the Ministry of Emergency Situations of the Republic of Belarus and licenses No. -1 Gospromnadzor of the Ministry of Emergency Situations of the Republic of Belarus).

EDB "Academicheskoe" is the leading nuclear engineering enterprise in the Republic of Belarus.

The enterprise is a supplier of equipment to the State Corporation of Russia "ROSATOM" and is currently equipping power units of the Belarusian NPP with equipment.

The enterprise has the technological capabilities to perform various types of machining (turning, milling, grinding, jig boring, welding, rolling, bending, etc.), welding (products made of carbon, stainless steels, copper, aluminum and titanium alloys) and control of finished products (radiographic, ultrasonic and capillary flaw detection, hydraulic testing, as well as an implemented and operating quality management system for design and manufacture that meets the requirements of STB ISO 9001-2015 (certificate of conformity No. BY/112 05.01.031 until 02.10.2020).

The enterprise offers mutually beneficial cooperation in the development and joint manufacture of equipment, cooperation, with the supply of manufactured equipment to enterprises in the countries of the Eurasian Economic Union and other countries.
Certification standards
The design and manufacturing quality management system complies with the requirements of STB ISO 9001-2009 (Certificate of Conformity No. BY/112 05.01.031).
Languages spoken
English
Russian

Information about partnership

Type of partnership considered
Distribution services agreement
Manufacturing agreement
Type and role of partner sought
Consumers interested in purchasing technological systems for automobile gas filling stations (a set of equipment) for receiving, storing, and issuing liquefied hydrocarbon gases under a manufacturing agreement.

Partners interested in purchasing technological systems for automobile gas filling stations (equipment set) for receiving, storing, and issuing liquefied hydrocarbon gases under adistribution services agreement.
Type and size of partner sought
> 500
251-500
SME 51-250
SME 11-50
SME <= 10
Sole proprietor

Attachments

Views: 189
Statistics since 02.12.2022 15:36:04